Magic ready mixed compound-18kg

Produced with the use of dolomite. Efficient and plastic, in form of paste ready to use. The mass can also be applied mechanical.

USE:

 READY TO USE FILLER is the highest quality finish in the form of paste ready to use. It is intended for use in finishing and repairs such as gypsum plasterboard joints, with use of bonding tape, plastering (smoothing) surfaces of walls and ceilings indoors that are not exposed to moisture.  can be applied on various surfaces: cement, cement-limestone, limestone, gypsum plasterboard, plasterboard, concrete and cellular plaster. Do not use on plastics, glass or deformable substrates.

PROPERTIES:

 READY TO USE FILLER is an ecological product. For its production, instead of plaster, we used natural dolomite powder and specially selected modifying additives, so that the mass is suitable for immediate use and ensuring  maximum comfort of work. One of its main characteristics are very good adhesion to the substrate, elasticity (high crack resistance), easy to distribute and work. Its micron structure allows perfect finish. Once it has been applied to the surface and completely dried, it will get a solid white colour. The product is an excellent layer for wallpapering and painting with all types of emulsion and acrylic paints.

SURFACES PREPARATION:

The surface should be degreased, free from dust and dirt. Loose and weathered layers should be removed so that the surface is a homogeneous and permanent structure. This surface is recommended to be primed with  PRIMER EMULSION.

APPLICATION:

READY TO USE FILLER after mixing it in a bucket is ready to use. Apply evenly to the dry surface, up to 3 mm thick at a time. Use stainless steel trowel. Larger cavities require the placement of further layers of filler, however, keep in mind that each layer must be dried well. The mass can be applied mechanically. To cover very large unevenness, we recommend that you use  START GYPSUM FILLER beforehand. After the surfaces are completely dry, we are recommending surfaces to be sanded with abrasive grit or abrasive paper. In order to dust off the ground surface, it can be wiped slightly with a damp cloth. After spackling does not require priming.

TECHNICAL DATA:

Work temperature from + 5 to + 25 C degrees. Timescale for product being open: about 2 hours. Drying time 2-24 hours, depending on temperature and humidity. Product consumption: about 1 kg / m2 at 1 mm layer thickness (filler). Maximum layer thickness 3 mm. Adhesion to gypsum plasterboard ≥0,25 MPa, adhesion to concrete ≥0,3 MPa. The shelf life of the product in the original packaging is 12 months. The product has a Hygienic Certificate of PZH.

STORAGE:

The product should be transported and stored in original sealed packaging. Protect from overheating and frost. Not worn, tightly closed FILLER can be reused. Keep out of the reach of children.

NOTES:

The product does not pose a threat, it has been positively assessed in terms of health. The data contained on the packaging is only general production information and indications as to how to use it. The manufacturer guarantees the high quality of the product, but does not take responsibility for the weather conditions and how the filler is being used. In case of any doubts, you should carry out your own application tests or consult the manufactSurer.